Precision Pull-off Adhesion Test Equipment
Study File 3
A strong heat-curing adhesive
for
adhesion testing of thermal resistant coatings
Pull-off testing of strong coatings requires strong
glue.
The E900S™
heat-curing epoxy is a versatile glue which cures at temperatures between 120°C
and 200°C to tensile strength of more than 70 MPa (measured with the PAT
adhesion tester). This adhesive is particularly suitable for thermal sprayed
coatings tested either on test panels, (ISO 4624 or ASTM D4541), or in accordance
with ASTM C633 (two test cylinders glued together).
Sold in 5ml syringes.
Read the technical description below:
