 |
||
Description |
|
 |
Portable and simple to use. |
|
Produces comparable test results both in the laboratory and on site. |
|
Precision gauge with both MPa (N/mm2) and p.s.i. reading. |
|
Simple layout of control panel. |
|
Rate of tensile force increase is infinitely variable between zero MPa/sec up to maximum rate (the rate depends on the size test element used). |
|
110/230V mains power. Battery power optional. |
|
All AT101 models can have the data logging module built in when new or retro-fitted into existing testing machine. |
|
Testing of coatings on any shaped substrates, e.g. inside and outside pipe surfaces. |
|
Supplied in solid aluminium case. |
|
TESTING RANGE |
||||
|
Test element size (diameter mm) |
Full Scale |
Certified testing range |
||
|
MPa |
psi |
MPa |
psi |
|
|
50 |
3.2 | 460 | 2.7 | 400 |
|
40 |
5 |
725 |
4.25 |
600 |
|
28.2 |
10 |
1450 |
8.5 |
1200 |
|
20 |
20 |
2900 |
17 |
2450 |
|
14.1 |
40 |
5800 |
34 |
4900 |
|
8.16 |
120 |
17400 |
102 |
14800 |
|
50x50mm square |
2.5 |
360 |
2.1 |
309 |
|
TECHNICAL DATA |
|
|
Maximum certified pull force |
5.4 kN |
| Accuracy | ±1% of full scale |
| Power | 110/230V AC |
| Battery | Optional |
| Hydraulic System Drive | Two-step servo motor |
| Weight complete in case | 8.2 kg |
| Case Dimensions (WxLxH) | 430 x 325 x 145mm / 17x13x6 inches |
| Complies with: | ISO 4924, EN24624, ASTM D4541, etc. |
|
INCLUDED WITH STANDARD MODEL |
|
• Automatic hydraulic
pump unit with control display • Hydraulic cable • PAT testing head 6.3kN • Adaptor for mains power • Aluminium carry-case with protective interior • Calibration Certificate |